Resource Center

For vent applications on load lock chambers, transfer chambers, cooling chambers, process chambers, and vacuum chambers.

The 7710 Series HyLine Filters provide reliable filtration for separating solids from liquids or gases. These filters have 316 stainless steel housings and come standard with a Buna N housing seal to provide strength and dependability.

Mott's Amino Acid Spargers Improve Profitability with Maximum Efficiency

Mott's Biofermentation Spargers are designed to increase O₂ absorption in amino acid fermentation, leading to decreased cycle times and lower energy costs.

Mott Corporation’s HyPulse® LS Series filters have been applied extensively throughout the chemical and hydrocarbon processing industries for removal and recovery of supported precious metals and other valuable catalysts.

A general overview of Mott precision sintered porous metal filter elements.

Model 7611 IGS External Filter System consists of the basic Mott 7610 IGS Filter connected to an inline eductor. It is designed to be used in most low pressure sampling applications.

When access is limited to a horizontal vessel or duct, our Model 7614 Flange Mounted External System allows installation of a complete Model 7611 External IGS Filter System (filter and eductor) by means of one flange.

Mott High Purity sanitary inline housings are designed for pharmaceutical, biotech, and food and beverage process gas filtration applications.

Minimal pressure drop in the filtration of low vapor pressure, high temperature gases generated in a direct liquid injection system

For ultra-high purity gas sticks in semiconductor, LED, photovoltaic, and MEMS equipment hookup using non-corrosive gases. 

Precision flow control in surface mount applications.

For high filtration efficiency in utility lines at the wafer fab and gas streams at the gas pad.

Complete details on Mott's GasShield® Defender High Flow Ultra High Efficiency Series Filters.

All of the key information pertaining to Mott's GasShield® Defender.

Whatever your priorities in flow control – whether you want low cost, consistent performance, or resistance to clogging – there’s one alternative that will satisfy on all counts: Mott High Purity Porous Metal Flow Restrictors.

Want more information or would like to receive a quote? Fill out the information request form below to speak with one of our qualified engineers.

Mott High Purity Fiber Filters FLP Series are designed for Low Pressure Drop Applications High Flow Rate/Low Pressure Drop.

Mott GasShield® Nickel and Stainless Steel Gasket Filters fits inside 1/4" and 1/2" face seal fittings.

Mott High Purity All-Metal Multitube Gas Filters are ideal for oxygen service.

GasShield® PENTA® POU filters offer the high flow and low ΔP of Teflon®, but with a 100% nickel filter element. This design reduces filter element surface area, resulting in lower levels of moisture retention and faster purge time.

Mott provides all-metal filters for semiconductor processes, as well as state-of-the-art diffusers and innovative flow restrictor products.

Detailed information for Mott High Purity Vent Filters which are all-metal Vent Filters for pressurized air or gases in extreme environments.

Mott HyPulse® GSV filter systems can remove greater than 99.999% of all solids depending on the application.

Mott’s state-of-the-art porous metal filter elements of the HyPulse LSI offer the ultimate in particle retention, backwashability, and durability.

Mott HyPulse HyLine Filters use elements made of Mott precision porous metal media, which allows automated, insitu backwash/blowback cleaning.

Mott precision porous metal flow restrictors are reliable, cost effective replacements for orifices, capillaries, or micrometering valves.

Model 7610 is the basic Mott IGS filter. The porous metal element is mounted in a housing with all-welded construction for maximum reliability. This design allows minimal hold-up volume and provides connections suitable for compression fittings.

Model 7612 Flange Mounted In-Stack IGS Filter System is designed to allow placement of the IGS filter inside a stack or pipe, without risk of fouling the filter element.

Information on Mott's Porous Metal Instrument filters precise, long-lasting management of liquids and gases. 

Polymer filter engineering and product guide.

Mott Porous Metal Micro Sparger tips for bench-top laboratory bioreactors and fermentors.

Does your project have a unique or challenging filtration or flow control specification? Let us help transform your product concept into reality.  When we collaborate with our customers early in the design phase, there’s no challenge we can’t address. In fact, you’ll find calibrated flow controllers from
Mott in unmanned space vehicles traveling throughout the galaxy and precision filters extracting nano-particles in the manufacture of semiconductors around the world.

PerfectPeak filter and column frits are made with certified quality materials for uniform pore size distribution and maximum column efficiency.  High repeatability results through minimal pressure drop.  Variety of alloys available such as stainless steel, titanium and hastelloy.

PerfectPeak® Static Mixers offer up to 80% baseline noise reduction, improved detection limits, and are easily installed into any hplc system.  Available in 25, 50, 100 and 150 µL versions.

PerfectPeak Static Mixers offer up to 60% better baseline noise reduction and detection limits versus comparable volume mixers.

Increase performance or decrease dwell volume with Mott PerfectPeak Static Mixers.

PerfectPeak® solvent inlet filters provide an anti-clog design to keep your HPLC equipment running at full capacity and safe from contamination.  PerfectPeak® Solvent Inlet Filters are available in 316L SS in 2 & 10 µm for HPLC applications with an option of 0.5 µm for UHPLC.  Also available in titanium and corrosion resistant Hastelloy® for bio-inert applications, these filters are all-metal construction for maximum durability.

Whether you‘re flowing gas or liquid, Mott porous metal is the proven, reliable, long-lasting media for efficient particle capture, flow restriction, wicking and gas/liquid contacting.

When it comes to developing efficient, long-lasting process filtration systems, no other company has more experience, and as much to offer, as Mott Corporation.

Mott High Purity Porous Metal Products for Biotechnology Applications are what you need when it comes to characteristics like strength, precision, efficiency, longevity, or clean-ability.

Detailed information for Mott Quick Change Sparger System for bioreactors and fermentors.

Cost effective gas filters for Semiconductor, LED, Photovoltaic and MEMS Equipment Hookup.

The 6200 Series Filter provides reliable filtration in a compact Tee Type filterhousing, that allows easy element changeout without breaking the piping connections to the filter.

The 6300 Series Filter provides reliable filtration in a compact inline configuration. The filter element is made up of seven (7) porous cups, which substantially increases the area over traditional designs, and increases on stream filter life. The filter surface area is 10 square inches.

The Series 6400 filter/sparger is a versatile product featuring a Mott precision porous metal seamless tube, and may be used for gas/liquid contacting as well as filtration applications.

The Series 6500 features Mott precision porous metal cups and hardware of 316L stainless steel or titanium. They can be used as samplers and spargers in a wide range of applications.

Series 6610 line filters are designed for line mounting in tubing with compression-type fittings. They are ideal for filtering liquids and gases to protect sensitive instruments.

Detailed information on Mott Corp's Sampling Filter, Series 8501 - Threaded Assembly.

Mott porous metal. There’s no better media for producing miniature, slow moving bubbles – the best method of achieving high-efficiency gas/liquid contacting.

Mott High Purity Steam Filters prevent SIP systems from being contaminated and help increase the life of adjoining equipment.

Detailed information for Mott’s Surface Mount Flow Restrictors for High Purity Gases.

Mott IGS Surface Mount Filters C-Seal Configuration are high-precision, high-flow, all-metal filtration engineered specifically for integrated gas system (IGS) assemblies.

Mott IGS Surface Mount Filters W-Seal Configuration are high-precision, high-flow, all-metal filtration engineered specifically for integrated gas system (IGS) assemblies.

Ultra Low Flow Drug Delivery Media

Clog-free, laminar flow control in vacuum chambers.